L. Network Capabilities:
1. The digital multiplexer recorder will have the ability to connect to a 10Base-T Ethernet Network.
2. License free Network software (DX-PC3) for Windows® will be included with each unit. This
software will also double as playback software playing back images copied to zip disk.
3. Live or pre-recorded images will be able to be viewed via LAN connection using the DX-PC3
application software.
4. The digital multiplexer recorder current functions will not be affected when viewing live or viewing
pre-recorded images.
5. The digital multiplexer recorder will be able to save one image (JPEG or bitmap) on to the connecting
PC’s hard disk.
6. One connection at a time will be able to access the digital multiplexer recorder via the network
connection.
Rear Connections:
1. The digital multiplexer recorder will have a SCSI-2 connector that will interface 2 additional hard disk
drives, a copy and archive drive.
2. The digital multiplexer recorder will have a termination switch that can be turned ON or OFF
providing self-terminating or external termination when external devices are connected to its SCSI-2
port.
3. The digital multiplexer recorder will have rear terminals that will allow the unit to be Powered ON or
OFF via direct connection.
4. The digital multiplexer recorder will have a clock adjust terminal enabling the unit’s clock to be reset
to the nearest hour.
5. The digital multiplexer recorder will have a REC. terminal that will force the unit into REC.
6. The digital multiplexer recorder will have a 9 pin D-Sub connector RS-232 port allowing remote
control functions of the unit. The RS-232 command codes will be provided on the units User Manual.
7. The digital multiplexer recorder will have one channel audio recording using PCM digital audio with a
sampling rate between 8KHz-12.8KHz.
8. The digital multiplexer recorder will have a Microphone input line enabling audio to be recorded with
video.
4
