- 18 -
b)
the product is damaged by the use of a consumable which is not supplied by
Mitsubishi Electric Australia or its recognised retailer and which consumable
is not of an equivalent standard and quality.
c)
the product is damaged by exhausted, leaking or used batteries or fails to function
correctly as a result of the use of such batteries.
d)
the product case is opened by a person other than Mitsubishi Electric Australia’s
recognised retailer or repairer, or the recognised retailer’s repair agent.
e)
the cathode ray tube exhibits a burned-in image due to continued use without an
effective PC screen saver.
3.
Under this Warranty:
a)
product defects covered by this Warranty will be repaired, during normal business
hours, at the premises of Mitsubishi Electric Australia’s recognised retailer or repairer,
or the recognised retailer’s repair agent without cost to the owner for parts and repair
labour or, at the option of Mitsubishi Electric Australia, the product will be replaced.
(Contact the Mitsubishi Electric Australia office in your State for details of recognised
repairers).
b)
the owner is responsible for all transport costs and intransit insurance costs if the
product or part has to be returned for repair to Mitsubishi Electric Australia’s
recognised retailer or repairer, or the recognised retailer’s repair agent. Whenever
possible, the product should be returned in its original carton and packing or
alternatively in packing suitable to prevent damage to the product. Mitsubishi
Electric Australia will not accept responsibility for damage to the product caused
by unsuitable or inadequate packing.
c)
the owner is at all times responsible for the repair of defects caused by accidental or
intentional damage, improper voltage, fire, misuse, abuse, neglect, alterations by or
negligence of the consumer, incorrect or incomplete installation or operation by the
consumer, Acts of God, vermin or foreign matter entering the product, e.g. dirt and
moisture. The OWNER RESPONSIBILITY list is provided to help in this regard.
Refer to the Owner’s Instruction Manual for operation and other information.
4.
For repair of the product under this Warranty:
a)
the retailer or repairer should be contacted within thirty (30) days of the fault developing.
b)
this Warranty with the original purchase docket must be presented to Mitsubishi
Electric Australia’s recognised retailer or repairer or the recognised retailer’s repair
agent.
5.
Various warranties or conditions may be implied or obligations may be
imposed on Mitsubishi Electric Australia by provisions of the Trade Practices
Act 1974 and other laws in force in Australia. If any such provision applies, then
to the extent permitted by law and to the extent that this Warranty is given in
addition to such warranties or conditions, any liability under this Warranty is
expressly limited to:
a)
in the case of products, the replacement of the product, the payment of the cost
of replacing the product or of acquiring an equivalent product, at the discretion of
Mitsubishi Electric Australia; and
b)
in the case of services, supplying the services again or the payment of the cost of
having the services supplied again, at the discretion of Mitsubishi Electric Australia.
6.
This is the only Warranty given by Mitsubishi Electric Australia on this product.
No other person or non-statutory organisation is authorised by Mitsubishi
Electric Australia to vary the provisions and conditions of this Warranty.
Summary of Contents for Diamond Pro 2060u
Page 2: ...ii...