11
AFTER
TIMER
OFF
AUTO OFF
Timer Setting
°
C
°
C
AUTO OFF
AUTO OFF
°
C
°
C
AFTER
OFF
AUTO OFF
7. Other Functions
°
C
°
C
TIME SUN
FUNCTION
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK
DAY
MONITOR/SET
CLOCK
ON/OFF
Lock Indicator
°
C
°
C
FUNCTION
°
C
°
C
FUNCTION
°
C
°
C
6. Timer
<Checking the Current Auto Off Timer Setting>
1. Be sure that the “Auto Off” is visible on the screen (at
1
).
2. Hold down the Timer Menu button
2
for
3 seconds
so that “Monitor”
is indicated on the screen (at
4
).
• The timer remaining to shutdown appears at
5
.
3. To close the monitor and return to the standard control screen, press
the Mode (Return) button
2
.
<To Turn Off the Auto Off Timer...>
Hold down the Timer On/Off button
9
for
3 seconds
so that “Timer
Off” appears (at
6
) and the timer value (at
7
) disappears.
Alternatively, turn off the air conditioner itself. The timer value (at
7
)
will disappear from the screen.
<To Turn On the Auto Off Timer...>
Hold down the Timer On/Off button
9
for
3 seconds
. The “Timer Off”
indication disappears (at
6
), and the timer setting comes on the display (at
7
).
Alternatively, turn on the air conditioner. The timer value will appear at
7
.
7.1. Locking the Remote Controller Buttons (Operation
function limit controller)
If you wish, you can lock the remote controller buttons. You can use
the Function Selection of remote controller to select which type of lock
to use. (For information about selecting the lock type, see section 8,
item [4]–2 (1)).
Specifi cally, you can use either of the following two lock types.
1
Lock All Buttons:
Locks all of the buttons on the remote controller.
2
Lock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
Note:
The “Locked” indicator appears on the screen to indicate that but-
tons are currently locked.
<How to Lock the Buttons>
1. While holding down the Filter button
4
, press and hold down the ON/
OFF button
1
for 2 seconds. The “Locked” indication appears on the
screen (at
1
), indicating that the lock is now engaged.
* If locking has been disabled in Function Selection of remote control-
ler, the screen will display the “Not Available” message when you
press the buttons as described above.
• If you press a locked button, the “Locked” indication (at
1
) will blink
on the display.
<How to Unlock the Buttons>
1. While holding down the Filter button
4
, press and hold down the ON/
OFF button
1
for 2 seconds—so that the “Locked” indication disap-
pears from the screen (at
1
).
1
Press the
AUTO STOP
or
AUTO START
button (TIMER SET).
• Time can be set while the following symbol is blinking.
OFF timer :
A
is blinking.
ON timer :
A
is blinking.
2
Use the
h
and
min
buttons to set the desired time.
3
Canceling the timer.
To cancel the OFF timer, press the
AUTO STOP
button.
To cancel the ON timer, press the
AUTO START
button.
• It is possible to combine both OFF and ON timers.
•
Pressing the
ON/OFF button of the remote controller during timer
mode to stop the unit will cancel the timers.
•
If the current time has not been set, the timer operation cannot be
used.
6.2. For Wireless Remote-controller
A
2
13
BG79U322H08̲EN.indd 11
BG79U322H08̲EN.indd 11
2008/10/14 9:52:49
2008/10/14 9:52:49
Summary of Contents for City Multi PCFY-P VKM-E
Page 21: ......
