1
1. Introduction
This user's manual gives specifications, handling instructions and other
information of the A8GT-TK Numeric Keypad Panel (hereafter referred to as
the "Numeric Keypad Panel").
First, please refer to the user's manual of the A8GT-70KBF/A8GT-50KBF
external I/O module (hereafter referred to as the "external I/O module") being
used.
The Numeric Keypad Panel is designed to be mountable onto a control box or
the like. It is connected to the external I/O module or terminal block conversion
module as a data entry Numeric Keypad Panel dedicated to the GOT800 series
(hereafter referred to as the "GOT").
MELSEC/A870GOT
MITSUBISHI
Connection cable
Length
GOT
A8GT-TK
A8GT-70KBF/A8GT-50KBF
50 cm
(19.69inch)
A8GT-C05TK
A8GT-C05TK
Restrictions on use
·Do not press two or more switches of the Numeric Keypad Panel at the same
time.
Pressing two or more switches simultaneously can cause mis-input.
·When setting any operation to each key of the Numeric Keypad Panel on
the SW3NIW-A8GOTP graphic settings software package, re-set the default
key code of each key to “FFFF”.
Otherwise, operation setting will be invalid.
