Mitsubishi 2018 ECLIPSE CROSS, Owner'S Handbook Manual

Page: 20 / 27

18
BLUETOOTH
®
OPERATION WITH SMARTPHONE LINK THIN-DISPLAY AUDIO (SDA) (IF EQUIPPED)
BLUETOOTH
®
CONTROLS FOR SDA TO MAKE A CALL
REDIALING
SAYING A TELEPHONE NUMBER (IF EQUIPPED)
MAKING A CALL USING A PHONEBOOK NUMBER
For a list of compatible Bluetooth
®
devices, please go to
http://www.mitsubishicars.com/owners
There are 3 ways to make a call: by saying a telephone number, by using the
Bluetooth 2.0 interface's phonebook, and by redialing a telephone number.
Press the SPEECH button. Say "Redial." The last phone number dialed from
the system will be redialed.
1. Press the Speech button.
2. Say "Dial Number."
3. After the voice guide says "Number please," say the telephone number.
4. The voice guide will say "Dialing <number recognized>." The
Bluetooth 2.0 interface will then make the call. When the confirmation
function is on, the system will confirm the telephone number again.
To continue with that number, answer "Yes." To change the telephone
number, answer "No." The system will say "Number please." then say
the telephone number again.
1. Press the SPEECH button.
2. Say "Address Book" (Note: You must have names stored in the
Phonebook or the voice guide will say "The vehicle phonebook is empty.
Would you like to add a new entry now?")
3. After the voice guide says, "Name please." Say the name you want to
call from those registered in the Phonebook. If there is only 1 match,
the system voice guide will say "Calling <name>" and will dial the
telephone number. If there are 2 or more matches, the voice guide will
say "More than one match was found, would you like to call
<repeats name> ." If that person is the one you want to call, answer
"Yes." If it is not the person, answer "No." The name of the next
matching person will be mentioned by the voice guide.
SPEECH BUTTON
Change to voice recognition
PICK-UP BUTTON
Answer an incoming call
HANG-UP BUTTON
End a call or voice recognition
1. Press the HOME key
2. Touch SETTING, then BLUETOOTH
3. Touch the NEW DEVICES. If the Bluetooth
®
device is permitted to pair
then the SDA system will allow the connection to be made.
4. Go to your phone settings to confirm pairing
If you have paired multiple Bluetooth
®
devices with your SDA system,
the Bluetooth
®
device that connected last will be selected and will
automatically connect when it is detected.
TO SELECT A DIFFERENT DEVICE:
1. Press the HOME key
2. Touch SETTING, then BLUETOOTH
3. Touch the PAIRED DEVICES
4. Touch the “device name” to connect
5. This will complete the selection of the Bluetooth
®
device
BLUETOOTH
®
PAIRING