10
**see navigation owner’s manual
DISPLAY AUDIO SYSTEM (continued) AND NAVIGATION SYSTEM (if equipped)
fm Radio broadcast information screen (Display audio system only)
3)
4)
1)
8)
6)
5)
2)
9)
7)
10)
16)
11),12)
13)
14)
17)
15)
1. Source plate - Displays the name of the currently selected source, preset channel
number, reception frequency, and station name.
2. HD Radio
TM
indicator - Displayed during digital sound output.
3. Preset switch - allows you to register your favorite broadcast stations.
touch and hold the switch for the desired preset channel number until you hear
the “beep”. this registers the broadcast station currently being received.
**
→
“Register Your Favorite Broadcast Stations”
4.
- touching it displays the sub-menu. the
Scan, Radio Setting, Sound Control
settings can be made.
5. <TUNE> - Used to change the frequency. touching and holding until you hear the
“beep” starts automatic station selection (seek).
**
→
“Starting the Seek”
6. SSN - Displays the ssn (short station name) that is currently being received.
if there is a sub-channel, “the received channel number/total number of sub-
channels” is displayed.
7. PTY - Displays the PtY (Program type) being received.
8. Info - switches to information display.
9. Station List - Displays a list of the stations that can be received.
**
→
“Search for Broadcast Stations from the Station List”
10. FM1, FM2 - allows you to register your favorite 6 stations for each band.
11. Title - Displays the acquired title name.
12. Radio Text - During analog reception, “title” changes to “Radio text”, and the
acquired radio text is displayed. the “artist” and “album” are not displayed.
13. Artist - Displays the acquired artist name.
14. Album - Displays the acquired album name.
15. Indicator - LIVE: live event broadcasts are displayed as they are received.
RBDS: RbDs data is displayed as it is received.
16. Switch page - if the title, artist name, and album title cannot fit in one page, the
display can be switched to Page 2 and beyond.
17. Preset - switches to preset display.
**see Display audio owner’s manual.
search for a location (navigation system only)**
10
Search from Address
searches for a location from an address.
1. Press the key.
this displays the destination menu.
2. Touch Address/Intersection.
3. Touch the item, then input the address.
To Activate the Navigation Voice Command:
1. Push and hold the
SPEAK button down on the steering wheel
for a couple of seconds.
2. to activate the navigation voice command, touch the
SPEAK
button on the steering wheel and you will engage only that
system.
4. Touch Set.
this displays the guidance start screen.
ADVICE
• Touching
Last 5 allows you to select from among the last
5 searches.
•
All Intersections can be selected when the street is input.
• Depending on the state of the information recorded in the
map data, representative locations for that area may be
displayed.