9
4. LOADING AND INSTALLATION
4.1 Handling Precautions
The following is an explanation of handling precautions of the
AJ65SBT2B-64RD3.
CAUTION
Do not touch the terminals while the power is on. Doing so may cause
malfunction.
Take care to prevent foreign matter such as dust or wire chips from entering
the module. Failure to do so may cause a fire, failure or malfunctions.
Never disassemble or modify the module. This may cause breakdowns,
malfunctioning, injury and/or fire.
Do not directly touch the conductive area or electronic components of the
module. Doing so may cause malfunction or failure in the module.
Because it is made of resin, do not drop or apply any strong impact to the
module. Doing so may damage the module.
Tighten terminal screws within the specified torque range.
A loose terminal screw may cause a short circuit or malfunction.
Overtightening a terminal screw may damage the screw, resulting in a short
circuit or malfunction.
When disposing of this product, treat it as industrial waste.
Use the module in an environment that meets the general specifications
given in this manual. Operating it in any other environment may cause an
electric shock, fire, malfunction, product damage or deterioration.
For protection of the switches, do not remove the cushioning material before
installation.
Securely fix the module with the DIN rail or installation screws. Installation
screws must be tighten within the specified torque range.
A loose screw may cause a drop of the module or malfunction.
Overtightening may damage the screw, resulting in a drop of the module or
malfunction.
Be sure to shut off all phases of the external power supply used by the
system before mounting or dismounting the module to or from the panel.
Not doing so can cause the module to fail or malfunction.
Always make sure to touch the grounded metal to discharge the electricity
charged in the body, etc., before touching the module.
Failure to do so may cause a failure or malfunctions of the module.
