Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022 Owner'S Manual Download Page 424 | Manualshive

Page: 424 / 535

background image

(423,1)

[ Edit: 2021/ 2/ 10

Model: DG-D ]

WAF0625X

SYSTEM MAINTENANCE

The parking sensors

are located on the rear

bumper. Always keep the area near the parking
sensors clean.

If the parking sensors are dirty, wipe them off
with a soft cloth while being careful to not
damage them.

The parking sensors may be blocked by
temporary ambient conditions such as splashing
water, mist or fog.

The blocked condition may also be caused by
objects such as ice, frost or dirt obstructing the
parking sensors.

Check for and remove objects obstructing the

area around the parking sensors.

Do not attach stickers (including transparent
material), install accessories or apply additional
paint on the parking sensors and their surround-
ing areas. This may cause a malfunction or
improper operation.

Do not subject the area around the parking
sensors to strong impact. Also, do not remove
or disassemble the parking sensors. If the
parking sensors and peripheral areas are de-
formed in an accident, etc., have the parking
sensors checked. It is recommended that you
visit an authorized Mitsubishi Motors dealer for
this service.

When washing the vehicle using a high-pressure
washer, do not apply direct washer pressure on
the parking sensors. This may cause a malfunc-
tion of the parking sensors.

FREEING A FROZEN DOOR
LOCK

To prevent a door lock from freezing, apply
deicer through the key hole. If the lock becomes
frozen, heat the key before inserting it into the
key hole, or use the F.A.S.T.-key.

ANTI-FREEZE

In the winter when it is anticipated that the
outside temperature will drop below 32°F
(0°C), check the anti-freeze to assure proper
winter protection. For additional information,
see “Engine cooling system” (P.8-4).

BATTERY

If the battery is not fully charged during
extremely cold weather conditions, the battery
fluid may freeze and damage the battery. To
maintain maximum efficiency, the battery
should be checked regularly. For additional
information, see “Battery” (P.8-11).

DRAINING OF COOLANT
WATER

If the vehicle is to be left outside without anti-
freeze, drain the cooling system, including the
engine block. Refill before operating the
vehicle. For details, see “Engine cooling
system” (P.8-4).

Starting and driving

5-173

COLD WEATHER DRIVING

Condition:

«
...
422
423
424
425
426
...
»

Summary of Contents for OUTLANDER SPORT/RVR 2022
























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for OUTLANDER SPORT/RVR 2022

Brand: Kargo Master Pages: 5

Brand: Eclipse Pages: 6

Brand: Jeda Pages: 8

Brand: Jeep Pages: 496

QuadraTop Adventure Top S

Brand: Quadratec Pages: 20

Brand: Barker Pages: 2

Brand: Kuda Pages: 2

Brand: Kia Pages: 11

Brand: Saab Pages: 426

Brand: travall Pages: 2

Brand: Gacell Pages: 12

Brand: Black+Decker Pages: 21

Brand: Beeper Pages: 20

Brand: Acura Pages: 7

Jumpy Miltispace

Brand: CITROËN Pages: 164

Brand: Directed Pages: 30

Brand: Buick Pages: 161

PRO-FLO XT 3527

Brand: Edelbrock Pages: 39

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands