Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Page: 265 / 535

(264,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
5-14
Starting and driving
.
If the F.A.S.T.-key is placed on the instru-
ment panel, inside the glove box or door
pocket, the F.A.S.T.-key may not function.
. If the F.A.S.T.-key is placed near the door
or window outside the vehicle, the F.A.S.T.-
key may function.
PUSH-BUTTON IGNITION
SWITCH OPERATION
CAUTION
.
Do not leave the vehicle for extended
periods of time when the ignition switch
is in the ON position and the engine is not
running. This can discharge the battery.
.
Use electrical accessories with the engine
running to avoid discharging the vehicle
battery. If you must use accessories while
the engine is not running, do not use them
for extended periods of time and do not use
multiple electrical accessories at the same
time.
WAF0389X
When the ignition switch is pushed without
depressing the brake pedal, the ignition switch
will illuminate.
Push the ignition switch center:
.
once to change to ON.
. two times to change to OFF.
The ignition switch will automatically return to
the LOCK position when any door is either
opened or closed with the switch in the OFF
position.
The ignition lock is designed so that the ignition
switch position cannot be switched to OFF until
the shift lever is moved to the P (Park) position.
When the ignition switch cannot be pushed
toward the OFF position, proceed as follows:
1. Push the park button to shift to the P (Park)
position.
2. Push the ignition switch. The ignition
switch position will change to the ON
position.
3. Push the ignition switch again to the OFF
position.
The shift lever can be moved from the P
(Park) position if the ignition switch is in the
ON position and the brake pedal is de-
pressed.
PUSH-BUTTON IGNITION
SWITCH POSITIONS
LOCK (Normal parking position)
The ignition switch can only be locked at this
position.
The ignition switch will lock when any door is
opened or closed with the ignition switched off.
ON (Normal operating position)
The ignition system and the electrical accessory
power activate at this position without the
engine turned on.
The ON position has a battery saver feature that
will place the ignition switch in the OFF
position, if the vehicle is not running, after
some time under the following conditions:
Condition: