Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022 Owner'S Manual Download Page 174

Page: 174 / 535

(173,1)

[ Edit: 2021/ 2/ 10

Model: DG-D ]

WAC0090X

DOME LIGHTS (if so equipped)

The dome lights are located on the ceiling
above the second raw seats.

Push the button to turn the dome lights on. To
turn them off, push the button again.

WAC0310X

REAR PERSONAL LIGHTS (if
so equipped)

To turn the rear personal lights on, push the
button. To turn them off, push the button again.

WAC0487X

VANITY MIRROR LIGHT

The vanity mirror light is located on the ceiling
above the vanity mirror.

The vanity mirror light will turn on when the
cover on the vanity mirror is opened.

When the cover is closed, the light will turn off.

The lights will also turn off after a period of
time when the lights remain illuminated to
prevent the battery from becoming dis-
charged.

Instruments and controls

2-81

Condition:

Summary of Contents for OUTLANDER SPORT/RVR 2022
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for OUTLANDER SPORT/RVR 2022

Reviews:

Related manuals for OUTLANDER SPORT/RVR 2022

Brands by name

Popular brands

Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Search results

Summary of Contents for OUTLANDER SPORT/RVR 2022

Reviews:

Related manuals for OUTLANDER SPORT/RVR 2022

Brands by name

Popular brands