Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 253 / 548

NOTE
l While the vehicle is held stationary with the
brake auto hold system, the Electric parking
brake will be automatically applied under
the following conditions, and a buzzer will
sound and the message will appear on the in-
formation screen in the multi information
display.
• After approximately 10 minutes have
elapsed while applying the brake auto
hold system.
• When the driver’s seat belt is unfastened.
• When the driver’s door is opened.
• When the operation mode of the power
switch is put in OFF.
• When the system detects the vehicle slid-
ing down a slope.
If the Electric parking brake cannot be applied au-
tomatically due to the system malfunction, the
message will appear on the information screen in
the multi information display. Depress the brake
pedal.
NOTE
To start the vehicle
Depress the acceleration pedal with the select
position in any position other than “P”
(PARK) or “N” (NEUTRAL).
The brakes are released, and the brake auto
hold indication lamp in the instrument cluster
will go off.
To turn off brake auto hold
Press the brake auto hold switch to turn brake
auto hold off. The indication lamp on the
switch goes off.
If you want to turn off the system while the
brake auto hold indication lamp is illumina-
ted, press the switch while depressing the
brake pedal.
NOTE
l If the brake auto hold system is turned off
without the brake pedal being depressed, a
buzzer will sound and the message will ap-
pear on the information screen in the multi
information display.
Hill start assist
E00628001237
The hill start assist makes it easy to start off
on a steep uphill slope by preventing the ve-
hicle from moving backwards. It keeps the
braking force for about 2 seconds when you
move your foot from the brake pedal to the
accelerator pedal.
Hill start assist
7-34
OGGE17E1
Starting and driving
7