Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 237 / 548

Select position indicator
E00636300102
This indicator displays the selector lever po-
sition in the meter.
NOTE
l When the “B” position is selected, the selec-
ted regenerative brake force position is also
displayed at “B” position.
l You cannot operate the regenerative brake
while the adaptive cruise control system
(ACC) is operating.
Selector lever positions
E00636400086
“P” PARK
The wheels are locked. When you park your
vehicle, be sure to apply the parking brake
and press the electrical parking switch.
“R” REVERSE
This position is to back up.
“N” NEUTRAL
No power is transmitted to the wheels. The
wheels are not locked.
WARNING
l Never move the selector lever to the “N”
(NEUTRAL) position while driving, you
will lose regenerative braking.
l Always keep your right foot on the brake
pedal when shifting into or out of “N”, to
minimize the risk of loss of control.
“D” DRIVE
This position is for normal driving.
“B” REGENERATIVE
BRAKE
This position is for the regenerative braking.
You can adjust the regenerative braking force
up to two levels.
Refer to “Selector lever operation” on page
7-16.
Refer to “When driving downhill” on page
7-31.
WARNING
l Sudden regenerative brake may cause the
tyres to skid.
Select this position according to the road
conditions and vehicle speed.
CAUTION
l When the capacity of the drive battery is
close to full or when the drive battery tem-
perature is low, the regenerative brake will
become less effective.
In such case, depress the brake pedal strong-
ly.
NOTE
l
If a large regenerative braking force is gen-
erated by using the selector lever or the re-
generative braking level selector, the stop
lamps will be automatically illuminated.
Select position indicator
7-18
OGGE17E1
Starting and driving
7