Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 188 / 548

Screen Cause Solution (Reference)
l The Forward Collision Mitigation System
(FCM), Lane Departure Warning (LDW)
and automatic high-beam system are tem-
porarily unavailable due to a high or low
temperature of the sensor. l After the temperature of the sensor has
been in range, the system will automati-
cally return to operation.
Refer to “Forward Collision Mitigation
System (FCM): When a problem is detec-
ted” on page 7-70.
Refer to “Lane Departure Warning
(LDW): System problem warning” on
page 7-87.
Refer to “Automatic high-beam system:
System problem warning” on page 6-58.
l The sensor is temporarily unavailable due
to conditions such as the adhesion of con-
taminants to the sensor or windscreen.
This is not a malfunction. Refer to “Forward Collision Mitigation System
(FCM): When a problem is detected” on page
7-70.
Refer to “Lane Departure Warning (LDW):
System problem warning” on page 7-87.
Refer to “Automatic high-beam system: Sys-
tem problem warning” on page 6-58.
l There is a fault in the system of the auto-
matic high-beam. l We recommend you to contact a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Automatic high-beam system:
System problem warning” on page 6-58.
Navigation information dis-
play*
E00531401061
On vehicles equipped with MITSUBISHI
Multi-Communication System (MMCS), the
following information on navigation will be
displayed when guidance location such as
junction and destination is approached after
Indication lamp, warning lamp, and information screen display list
6-41
OGGE17E1
Instruments and controls
6