Mitsubishi MOTORS Lancer Evolution IX 2005, Workshop Manual Supplement

Page: 39 / 106

ENGINE COOLING – WATER HOSE AND PIPE 14-3
Water hose and pipe
Removal and fitting
Jobs to be completed before removal and after fitting
• Removal and refitting of the valence
• Draining and refilling of the water coolant
• Removal and refitting of the air cleaner ASSY
• Removal and refitting of the air by-pass valve ASSY, the air by-pass hose, air hoses D and E, and air pipe C
• Removal and refitting of the secondary air control valve (Ref Section 15: Secondary air control system)
Removal procedure
1. Connection to the radiator upper hose
2. Connection to the radiator lower hose
3. Water temperature gauge unit connector
4. Water temperature sensor connector
5. Water hose
6. Bracket
7. Water outlet fitting and thermostat case
ASSY
8. Thermostat case gasket
9. Connection to the knock sensor harness
clamp
10. O-ring
11. Water hose
12. Water hose
13. Connection to the heater hose
14. Water hose
15. Water inlet pipe
16. O-ring
17. Turbocharger water feed pipe
18. Gasket
•
Turbocharger ASSY
19. Turbocharger water return pipe
20. Gasket
" "
A
! ! ! !
B
" "
" " A ! ! ! ! B " "
! !
A
" "
! ! A " "
! !
A
" "