manualshive.com logo in svg

Mitsubishi Heavy Industries SRK15ZTL-W, User Manual, Page: 28 / 38

Share
Download
Mitsubishi Heavy Industries SRK15ZTL-W User Manual Download Page 28

 EN-26 

This mode can reduce the noise from the outdoor unit.

This mode is ever more silently than the SILENT mode 1.

SILENT mode setting

2

Select the SILENT mode by pressing “  or   (TEMP/ 
TIMER)” button.

■

  This function allows you to adjust the volume of the sound issued from the outdoor unit during SILENT operation in 2 levels.

Select the SILENT mode setting by pressing the MENU 
switch.

1

SILENT mode 1

Initial 

display

SILENT mode 2

Press the ON/OFF button.

3

  Once SILENT mode setting is configured, it is stored in the 

air-conditioner even if the power source is turned off. To change SILENT 
mode setting, set again with the remote control.

NOTE

Wireless LAN communication setting

■

  The wireless LAN communication can be switched between ON and OFF.

Wireless LAN communication setting can be set regardless of whether the air-conditioner is running or not.

2

Select the wireless LAN communication by pressing “  
or   (TEMP/ TIMER)” button.

Select the Wireless LAN communication setting by 
pressing the MENU switch.

1

Press the ON/OFF button.

3

Initial 

display

Wireless LAN 

communication ON

Wireless LAN 

communication OFF

NOTE

  Once Wireless LAN communication setting is configured, it is stored 

in the air-conditioner even if the power source is turned off. To change 
Wireless LAN communication setting, set again with the remote control.

  If the Wireless LAN communication setting is set to OFF, the Wi-Fi 

function will be unavailable.

RLH012A002_EN.indd   26

RLH012A002_EN.indd   26

2021/11/29   10:31:36

2021/11/29   10:31:36

Summary of Contents for SRK15ZTL-W







































Reviews:

No comments