Easy to Install:
■
With latches up, position
Safe-er-Grip
TM
where desired
on tub or shower wall.
■
Apply pressure to the handle
while flipping the latches down.
■
Be sure to attach to smooth,
dry, non-porous surfaces only.
If installed on tile, the tile
must be a 4” x 4” or greater.
Do not install on tile grout lines.
Not to be used on painted
surfaces (ie: drywall).
IMPORTANT:
Check Safe-er-Grip regularly
to ensure it is still firmly
attached. If it can be moved or
feels at all loose, flip up the
latches and reinstall as per
instructions above.
Easy to Remove:
■
Release both latches.
■
Slide a fingertip under rubber
seal at each end to release
suction. If necessary, slide
something flat, such as a
credit card, under the suction
cups to release grip.
CAUTION:
Safe-er-Grip
is to be used as a balance
assist only. Not for body weight
leverage – body weight is not to
be applied to product. (If device is
required to bear any body weight,
or is used for leverage, it is
recommended that a traditional
permanently mounted grab bar
be installed.) Check attachment
before each use and reattach
if loose.
Made in China
BATHTUB & SHOWER HANDLE
POIGNÉE POUR BAIGNOIRE ET DOUCHE
MANIJA DE BAÑERA Y DUCHA
Safe-er-Grip
TM
INSTRUCTIONS
FOR USE:
Francais au verso
Reverso en espanol
safe-er-grip-instructions-REV-8-2017.xpress_Layout 1 8/1/17 7:20 AM Page 1
