- 5 -
5. OPERATION PROCEDURES
With the exception of the
keys, all key operations are disabled during stitching (during
machine operation). (Cannot be changed even by pressing the keys.)
Straight Lock Stitching
(1) Standard lock stitching (manual stitching)
Press pattern number setting key 8 while watching pattern number display
area 1 to select from patterns 1 to 3.
Setting the stitch edge:
Turn all start backtacking buttons
and end backtacking buttons
OFF.
(2) Fixed-stitch stitching
Press pattern number setting key 8 while watching pattern number display area 1 to select from
patterns 1 to 3.
Press the
key and setting the number of stitches for fixed-stitch stitching is valid.
Setting the stitch edge:
Turn all start backtacking buttons
and end backtacking buttons
OFF.
Setting the number of stitches for fixed-stitch stitching:
Press the
key to change the display to "N".
Set the number of stitches using setting value selection keys 9 , 10 , 11 , 12 when
the LED
illuminates. A setting value of "0" to "9999" is
possible. (Manual stitching is performed if set to "0".)
Backtacking
Press pattern number setting key 8 while watching pattern number
display area 1 to select from patterns 1 to 3.
(1) Start backtacking
*Select the start backtacking type from the
. start backtacking
selection keys ( 13 , 14 , 15 )
(Start backtacking is not performed if no selection is made.)
*Press the
key ( 6 ) to set the number of start backtacking stitches. The
LED
illuminates and the number of backtacking stitches (A, B) displays at the stitch number display area ( 2 , 3 ).
While watching these values, set the number of stitches using the setting value selection keys ( 9 , 10 ).
(2) End backtacking
*Select the end backtacking type from the
end backtacking selection keys
( 16 , 17 , 18 ) (End backtacking is not performed if no selection is made.)
*Press the
key ( 6 ) to set the number of end backtacking stitches. The
LED
illuminates and the number of backtacking stitches (C, D) displays at the stitch number display area
( 4 , 5 ). While watching these values, set the number of stitches using the setting value selection keys
( 11 , 12 ).
3
2
4
5
10
9
11
12
1
8
1
8
