manualshive.com logo in svg

Mitsubishi Electric WS-48315, Service Manual

Share
Download
Mitsubishi Electric WS-48315 Service Manual Download Page 15

MODELS: WS-48315 / WS-55315 / WS-65315

Page 15

SERVICING THE DIAMONDSHIELD™

1. DiamondShield Removal Procedure

The location of the DiamondShield molding clips may vary between models, top and bottom, or sides.  Use
the appropriate disassembly procedure given below.

Note:

Wear gloves when handling the DiamondShield to prevent finger prints.

1. Gently insert a small screwdriver between the

DiamondShield and one end of the clip to pry
the clip loose.

2. Remove both clips by pulling them toward you.

3. Carefully insert a small screwdriver into the gap

at the top/center point of the Shield and pull the
Shield slightly away from the unit. Place your
hands at the points shown and gently bow the
Shield toward you and remove from the unit.
Then re-install the two clips.

Top & Bottom Molding Clips

Side Molding Clips

1. Gently insert a small screwdriver between the

DiamondShield and one end of the clip to pry
the clip loose.

2. Remove both clips by pulling them toward you.

3. Carefully insert a small screwdriver into the gap

at the side/center point of the Shield and pull the
Shield slightly away from the unit. Place your
hands at the points shown and gently bow the
Shield toward you and remove from the unit.
Then re-install the two clips.

2. DiamondShield Installation Procedure

*(See the Parts List for DiamondShield  part numbers)

To install the DiamondShield, reverse the above Removal Procedure.

Summary of Contents for WS-48315





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands