manualshive.com logo in svg

Mitsubishi Electric WD390U-EST, User Manual

Share
Download
Mitsubishi Electric WD390U-EST User Manual Download Page 47

EN-47

•  About

  Displays the version information of the  LAN 

Display System. 

•  Exit

  Exits the LAN Display System.

Important:

•  The items marked with “*” are not available for 

Mac OS X.

•  When “Advanced Screen Capture” is enabled, 

the computer mouse cursor may blink.

Ending the LAN Display projection

5.  Click the Exit button on the main user interface or 

the menu window to exit the LAN Display System.

6.  In case of the wireless LAN communication, unplug 

the USB wireless LAN adapter from the projector. 
Before unplugging, be sure to press the UNPLUG 
button on the remote control and select [Yes] on 
the screen by pressing the 

 or 

 button and then 

ENTER button.

Important:

•  Do not switch the input source to USB Display 

or PC Less Presentation during the wireless LAN 
communication. If switched, the communication 
will be disconnected.

•  During wireless LAN communication, the projector  

cannot communicate with the access point.

•  Only infrastructure mode is available to wireless 

LAN communication. Adhoc mode is not available.

Installing the virtual display driver

To project a virtual extended screen, install the Virtual 
display driver as follows.
1.  Double-click “Virtual display driver.exe” contained 

in “C:¥Program Files¥LAN Display System”, and 
start up the installer of the Virtual display driver.

2.  The Setup window is displayed. Click [Next] 

and operate according to the instructions on the 
window.

 

3.  When the installation has been completed, restart 

the computer.

 

Using remote desktop

Connect an USB device such as a mouse or keyboard 
to the USB-A terminal on the projector. While the 
computer images are projected with the LAN Display,   
the computer can be operated with the device.

AUDIO OUT

AUDIO IN-3R

VIDEO

MONITOR OUT

IN-2

USB-B USB-A

LAN

IN-1

COMPUTER / COMPONENT VIDEO

SERIAL

S-VIDEO

AUDIO IN-3L

AUDIO

IN-2

AUDIO

IN-1

To USB-A 

terminal

Important:

•  The USB-A terminal on this projector is compatible 

with USB 2.0.

•  Supported USB device is standard USB HID device 

with power consumption less than 5V/500mA.

•  When using a keyboard and mouse together, we 

recommend a commercially available wireless 
keyboard and wireless mouse intended for a 
computer with wireless receiver.

•  When using a USB hub, you are recommended to 

use the one with external power supply. 

•  Some USB hubs cannot be used depending on the 

specifications.

Advanced display utilities (continued)

Summary of Contents for WD390U-EST






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands