Mitsubishi Electric TRANE NTXWST18A112A Series Operating Instructions Manual Download Page 2

En-1

● OPERATING INSTRUCTIONS ●

•  Since rotating parts and parts which could cause an electric shock are used 

in this product, be sure to read these “Safety Precautions” before use.

•  Since the cautionary items shown here are important for safety, be sure to 

observe them.

•  After reading this manual, keep it together with the installation manual in a 

handy place for easy reference.

Marks and their meanings

 WARNING :

Incorrect  handling  could  cause  serious  hazard,  such  as 

death, serious injury, etc. with a high probability.

 CAUTION :

Incorrect handling could cause serious hazard depending 

on the conditions.

Meanings of symbols used in this manual

 :  Be sure not to do.

 :  Be sure to follow the instruction.

 :  Never insert your fi nger or stick, etc.

 :  Never step onto the indoor/outdoor unit and do not put anything on them.

 :  Danger of electric shock. Be careful.

 :  Be sure to disconnect the power supply plug from the power outlet.

 :  Be sure to shut off the power.

S

AFETY PRECAUTIONS

C

ONTENTS

 SAFETY PRECAUTIONS 

1

 NAME OF EACH PART 

3

 PREPARATION BEFORE OPERATION 

4

 SELECTING OPERATION MODES 

5

 FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT 

6

 SMART SET OPERATION  

6

 ECONO COOL OPERATION  

7

 TIMER OPERATION (ON/OFF TIMER) 

7

 CLEANING 

8

 WHEN YOU THINK THAT TROUBLE HAS OCCURRED 

9

 WHEN THE AIR CONDITIONER IS NOT GOING TO BE USED FOR A LONG TIME 

10

 INSTALLATION PLACE AND ELECTRICAL WORK 

10

 SPECIFICATIONS 

10

 WARNING

Do not connect the power cord to an intermediate point, 

use an extension cord, or connect multiple devices to a 

single AC outlet.

•  This may cause overheating, fi re, or electric shock.

Make sure the power plug is free of dirt and insert it se-

curely into the outlet.

•  A dirty plug may cause fi re or electric shock.

Do not bundle, pull, or modify the power cord, and do not 

apply heat or place heavy objects on it.

•  This may cause fi re or electric shock.

Do not turn the breaker OFF/ON or disconnect/connect the 

power plug during operation.

•  This may create sparks, which can cause fi re.

•  After the indoor unit is switched OFF with the remote con-

troller, make sure to turn the breaker OFF or disconnect the 

power plug. 

Do not expose your body directly to cool air for a prolonged 

length of time.

•  This could be detrimental to your health.

The unit should not be installed, relocated, disassembled, 

altered, or repaired by the user.

•  An improperly handled air conditioner may cause fi re, electric 

shock, injury, or water leakage, etc. Consult your dealer.

•  If the power supply cord is damaged, it must be replaced 

by the manufacturer or its service agent in order to avoid a 

hazard.

When installing, relocating, or servicing the unit, make 

sure that no substance other than the specifi ed refrigerant 

(R410A) enters the refrigerant circuit.

•  Any presence of foreign substance such as air can cause 

abnormal pressure rise and may result in explosion or in-

jury.

•  The use of any refrigerant other than that specifi ed for the 

system will cause mechanical failure, system malfunction, 

or unit breakdown. In the worst case, this could lead to a 

serious impediment to securing product safety.

This appliance is not intended for use by persons (includ-

ing children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction concern-

ing use of the appliance by a person responsible for their 

safety.
Children should be supervised to ensure that they do not 

play with the appliance.

  

Do not insert your fi nger, a stick, or other objects into the 

air inlet or outlet.

•  This may cause injury, since the fan inside rotates at high 

speeds during operation.

  

In case of an abnormal condition (such as a burning smell), 

stop the air conditioner and disconnect the power plug or 

turn the breaker OFF.

•  A continued operation in the abnormal state may cause a 

malfunction, fi re, or electric shock. In this case, consult your 

dealer.

When the air conditioner does not cool or heat, there is 

a possibility of refrigerant leakage. In this case, consult 

your dealer. If a repair involves recharging the unit with 

refrigerant, ask the service technician for details.

•  The refrigerant used in the air conditioner is safe. Normally, 

it does not leak. However, if refrigerant leaks and comes in 

contact with a heat source such as a fan heater, kerosene 

heater, or cooking stove, it will create a harmful gas.

The user should never attempt to wash the inside of the 

indoor unit. Should the inside of the unit require cleaning, 

contact your dealer.

•  Unsuitable detergent may cause damage to plastic material 

inside the unit, which may result in water leakage. Should 

detergent come in contact with electrical parts or the motor, 

it will result in a malfunction, smoke, or fi re.

JG79Y580H01_01En.indd   1

2018/08/01   18:16:30

Summary of Contents for TRANE NTXWST18A112A Series

































Reviews: