6
PARAMETER SETTINGS
1
OVE
R
VI
EW
2
SYS
TEM
CONFIGURA
T
ION
3
SP
ECIFI
C
A
T
IO
N
S
4
FUNCT
IONS
5
P
R
OCEDURES AND
SE
TTI
N
G
S BE
FO
R
E
O
PERA
T
IO
N
6
P
ARAMETER
SETTI
NGS
7
IN
ST
A
LLI
NG
AN
D
UN
IN
S
TAL
LI
N
G
S
O
F
T
W
AR
E P
A
CK
AG
E
S
8
CC
IE Control
UT
IL
ITY
6.9 Target Settings
6
- 24
6.9
Target Settings
This function is used to set logical numbers for accessing the multiple CPU system or
redundant CPU system.
The target settings are set on the "Target setting" screen in the CC IE Control utility.
Section 8.4.8 Target setting screen
(1) Setting example when accessing the multiple CPU system
(2) Setting example when accessing the redundant CPU system
POINT
When a CC-Link IE Controller Network board with a serial number whose first five
digits are 10091 or lower, or an SW1DNC-MNETG-B with the software version
1.04E or earlier is used, the redundant CPU system cannot be accessed directly
with the CC-Link IE Controller Network interface board.
Relay the MELSECNET/H network system to access the redundant CPU system.
CC-Link IE Controller Network
(Network No.1)
CPU No.2
CC-Link IE Controller Network module
(Multiple CPU controlled by CPU No.2)
CPU No.1
Station No.1
Station No.2
Setting the CPU No.1 of multiple CPU system
MELSECNET/H
(Network No.1)
MELSECNET/H module
Control system
Standby system
Tracking cable
CC-Link IE Controller Network module
Station No.1
Station No.2
CC-Link IE Controller Network
(Network No.2)
Station No.3
Station No.4
Station No.5
Setting the control system of redundant CPU system
