Mitsubishi Electric PRC- 8MYA Operation Manual Download Page 2

1

Warning.

Use only optional parts authorized by Mitsubishi Electric.

     

If the accessories are installed improperly, water leakage, electric shock
or fire may result.
Ask your dealer or an authorized company to install them.

Danger and the extent caused when wrong handling is done
are divided by displaying        warning and        attention and
are explained.

Before operating the unit ,make sure you read all the
"Safety precautions".   

"Safety precautions" lists important points about safety.
Please be sure to follow them.   

The display and its meaning are given below.

Warning

Erroneous handling gives a high possibility
to induce serious results such as death
or heavy injury.

Caution

Erroneous handling may induce serious
injury depending on the situation.   

Warning.

Carefully read the labels affixed to the main unit.

1. Safety precautions.

Caution.

    

     

Ask your dealer or specialized subcontractor for

installation.

    

Conducting installation work by yourself improperly may cause
a fire, electric shock or water leakage. 

1.1 Installation.

The Installation Manual details the suggested installation method.   
Any structural alteration necessary for installation must comply with
local building code requirements.
After you have read this manual, keep it and the Installation
Manual in a safe place for easy reference whenever a question arises.
If the unit is going to be operated by another person, make sure
that this manual is given him or her.
The unit should not be installed by the user.
 (Safety and the function cannot be secured.)

Never repair the unit, remodel or transfer it to another

site by yourself.

      

If they are performed improperly, water leakage, electric shock or
fire may result.
If you need to have the unit repaired or moved, consult your dealer.

Take a proper measure to suppress the critical

concentration of refrigerant, if leaked when installing

the unit in a small room.

     

The limit density is made not to be exceeded even if the refrigerant
leaks by any chance.
You are necessary to ventilation measures to prevent the accident.
If the refrigerant leaks, hypoxia accident may caused.
For the countermeasure to be taken, consult your dealer.

The unit should be securely installed.

If the unit is loosely mounted, it may fall, causing injury.

Never install on the place where a combustible gas might
leak.

    

The gas may ignite or explode when the gas leaks and collects
in surroundings of the unit.

Caution.

The unit should be installed in a location where air and
noise emitted by the unit will not disturb the neighbours.

2 )   Drain piping (hose) 

Caution.

    

3 )   Power line, fuse or circuit breaker 

Make sure that there is a main power switch.

4 )   Earth connection 

Remote controller is not allowed to install for the place
where direct sunshine strikes.

Please do not use the unit in the following places.

Place where a lot of oil (The machine oil is contained), moistures,

and dust exist.

Place where a lot of salinity such as beach districts exists.

Place where sulfur gas, volatile gas, and corroded gas are filled.

Place where acid solution is frequently used.

Place where special spray is frequently used.

Hot spring zone.

Near machine (high cycle welding machine etc.) generating high cycle.

Place where ventilation entrance of unit is closed by snowfall.

The main body might corrode when the unit is used in such a place,

the refrigerant leak, the performance of the unit decrease remarkably,

and it cause the damage of parts of the unit.

1 )   Unit 

Warning.

Please pay attention to the refrigerant   (Freon gas).

A non flammable, non-toxic, odourless refrigerant is used for this air
conditioner.

The refrigerant is collected on the floor side in the room because the
specific gravity are larger than air. And, it causes the hypoxia accident.

When the refrigerant gas leaks by any chance, the user must ventilates
air enough by stopping the drive of the unit and opening the door.

Warning.

The unit must be installed on stable, level surface in a 
place where there is no accumulation of snow, leaves or
rubbish.

Do not stand on, or place any item on the unit.

    

You may fall down or the item may fall, causing injury.

The heating of refrigerant is noted.

   

     
When the refrigerant touches the fire etc., it was decomposed and
a poisonous gas is generated.
Do not use the welding machine etc., in the room close up of the
installation of the air conditioner.

Install drain piping (hose) according to
Installation Manual to ensure proper drainage.

    

Improper drain piping (hose) may cause water
leakage and damage to furniture or other possessions.

Use breaker or fuse with proper capacity.

   

Using a wire or copper wire instead of proper capacity can cause fire
or trouble.
Other appliances connected to the same line could cause an overload.

When installing at a watery place, provide an electric
leak breaker.
         

Failure to mount the electric leak breaker may cause electric shock.

The unit must be properly earth connected.

      
Do not connect the earth wire to gas pipe, city water
pipe, lightning rod or telephone earth wire.
Improper earth connection may cause electric shock.

The symbols used here represent that as follows.

Never do this.

Never touch without wearing glove on your hands.

Make sure to connect earth line.

Summary of Contents for PRC- 8MYA












Reviews: