background image

FOR SAFE USE

 

Before the installation, operation,  and inspection for this product, read the “FOR  SAFE USE” and the 

technical manuals carefully. Also read the other technical manuals, “Control Unit” and “Operation Panel” 

describing some instructions, which are not in this manual, and use the sewing machine properly. 

 

SAFETY INDICATIONS

 

 

DANGER

 

Indicates that incorrect handling may cause hazardous conditions, resulting 

in death or severe injury.

 

 

CAUTION

 

Indicates that incorrect handling may cause hazardous conditions, resulting 

in medium or slight personal injury or physical damage. Note that CAUTION 

level may lead to a serious consequence according to the circumstances. 

Always follow the instructions of both levels because they are important to 

personal safety.

 

 
CAUTION INDICATIONS

 

No. 

Caution indication 

Description 

 

 

Precaution for sewing machine operation: 

Indicates  that  removing  the  safety and operating the sewing 

machine for some other purposes with power-on are prohibited. 

 

Please do not  operate the sewing machine without 

protective equipment such as a needle guard, an eye guard, 

a belt cover or the others. 

 

Please turn off the power switch when threading, changing 

a needle and a bobbin, cleaning, and lubricating. 

   

 

 

Caution for fingers injury: 

Indicates a possibility of fingers (hands) injury in a certain 

condition. 

 

 

 

 

Caution for squeezing fingers: 

Indicates a possibility of squeezing fingers in a certain condition. 

 

 

 

   

Summary of Contents for PLK-G10050













Reviews: