background image

New publication, effective Sep. 2005.

Specifications subject to change without notice.

The Air Conditioning & Refrigeration Systems Works acquired ISO 9001 certification under
Series 9000 of the International Standard Organization (ISO) based on a review of quality
warranties for the production of refrigeration and air conditioning equipment.

ISO Authorization System
The ISO 9000 series is a plant authorization system relating to quality warranties as stipu-
lated by the ISO.   ISO 9001 certifies quality warranties based on the “design, development,
production, installation and auxiliary services” for products built at an authorized plant.

The Air Conditioning & Refrigeration Systems Works acquired environmental management
system standard ISO 14001 certification.

The ISO 14000 series is a set of standards applying to environmental protection set by the
International Standard Organization (ISO).  ISO 14001 certifies the plant’s environmental
protection system and activities.

Certificate Number FM33568

Certificate Number EC97J1227

Registered on March 10, 1998

MEE05K361

Printed in Malaysia

HEAD OFFICE: MITSUBISHI DENKI BLDG., 2-2-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN

Summary of Contents for PEH-RP200MYA



































Reviews: