Mitsubishi Electric PEH-P10YE, Technical & Service Manual

Page: 10 / 28

–8–
2 2
2 2
2 PART NAMES AND FUNCTIONS
Indoor unit
• Air inlet : Sucks the ambient air in.
• Filter : The filter bruit into the unit as standard is a
simple filter to remove visible dust and dirt. If
air pulification is one of the conditions required
for use, consult with your dealer.
• Air outlet : Blows the air back out into the room.
Remote controller (PAR-S27AA)
• Once the controls are set, the same operation mode can be repeated by simply pressing the ON/OFF button.
Operation buttons
ON/OFF –
STAND BY
DEFROST INDOOR UNIT
ADDRESS NO.
ERROR CODE
OA UNIT ADDRESS NO.
CENTRALLY CONTROLLED
CLOCK
ON OFF ˚C
1Hr.
NOT AVAILABLE
˚C CHECK MODE
FILTER
CHECK
TEST RUN
ON OFF CLOCK
FILTER
CHECK
TEST RUN
REMOTE CONTROLLER
PAR-S27AA
TEMP. TIMER SET
TIMER button
This switches between continuous
operation and the timer operation.
OPERATION SWITCH button
Press this button to switch the cooler elec-
tronic dry (dehumidify) automatic and heater
modes.
TIMER ADJUSTMENT
button
This adjust current time, start time
and stop time.
AIR SPEED button
This sets the fan speed.
ON/OFF button
This switches between the operation
and stop modes each time it is
pressed. The lamp on this button lights
during operation.
AIR DIRECTION button
This adjust the vertical angle of the ven-
tilation.
FILTER button
This resets the filter service indication
display.
TIME SETTING button
This sets of switches the current time,
start time and stop time.
CHECK-TEST RUN button
Only press this button to perform an
inspection check or test operation. Do
not use it for normal operation.
TEMP ADJUSTMENT button
This sets the room temperature. The tempera-
ture setting can be performed in 1
°
C units
Setting range
Cooler 19
°
C to 30
°
C
Heater 17
°
C to 28
°
C
VENTILATION button
This set the ventilation fan speed.
LOUVER button
This switches the horizontal fan motion ON
and OFF.
(This button does not operate in this model)
Air inlet
Air outlet
Filter