8
2
1
0
9
8
7
6
5
4
3
Nrm
Set
Adjusting
switch
Pair number
switch
Wireless remote controller operating section
(When the battery cover is removed)
4-2. Inserting Batteries
1
Remove the battery cover and insert the bat-
teries.
2
Replace the battery cover and press the reset
button.
Re-place the battery cover.
Press the area marked “
” with your
finger and slide the cover to remove.
™
All the LCD displays will light up for 3 seconds when the reset button is pressed.
™
Be sure to press the reset button whenever the batteries are replaced.
™
The controller may malfunction if the reset button is not pressed after the batteries have been
replaced.
Batteries
™
The batteries have run out when the “
” mark (battery voltage drop) appears, when the signals
cannot reach the receiver of the air-conditioner or when the LCD becomes weak. In these cases,
replace the batteries with new alkaline batteries (size AAA). (Make sure that both batteries are
replaced.)
™
Using manganese batteries will reduce the distance the signals can reach.
™
Do not use rechargeable batteries (Ni-Cd).
™
The life of alkaline batteries is approximately one year.
™
Remove the batteries if the remote controller will not be used for a long time.
Note:
Do not change the settings on the
adjusting switch and pair number
switch when the battery cover is re-
moved. Doing so will disable control.
