11
GB
Temperature range
Cool/Dry
19 to 30
°
C
Heat
17 to 28
°
C
Auto
19 to 28
°
C
The temperature cannot be adjusted in the Fan mode.
The temperature cannot be adjusted for a ventilation unit group.
(4)
Prohibiting the local Remote Controller
This setting is only possible with a master system controller.
[Collective Operation Screen]
Prohibit settings of all registered local remote controllers.
[Group Operation Screen]
Prohibit settings of local remote controllers in selected groups.
<Making Settings>
1
PROHIBIT
,
ON/OFF
, <
MODE
>, <
TEMP.
>, and
FILTER
blink in sequence each time the
PROHIBIT
switch is pressed.
• Items already prohibited on the group operation screen are lit (all blink on the collective opera-
tion screen).
• The item in < > is not displayed while a ventilation unit group is selected.
2
The following switches are used to prohibit or permit items for the local remote controller.
ON/OFF
switch: Prohibit or permit ON/OFF.
MODE
switch: Prohibit or permit mode select.
FILTER
switch: Prohibit or permit filter reset.
TEMP. switch (
,
): Prohibit or permit temperature setting.
* Enable/Disable Display
ON
: Prohibit
OFF
: Permit
BLINK : Not yet set
The switches toggles between Lit and Extinguished each time it is pressed.
3
Press the
PROHIBIT
switch to check whether each setting is permitted or prohibited.
•
PROHIBIT
is lit for a prohibited item.
• All items blink during operation on the collective operation screen. None are permitted, and the
prohibited status of each group continues.
NOTE: PROHIBIT cannot be selected for MODE and TEMP. with ventilation unit groups.
(5)
Operation mode switching limitation (season switching)
[Collective Operation Screen]
Limits switching between specified operating modes for the this unit and the local remote control-
lers for all groups.
For example, the selection can be limited to suit the season: COOL (winter), HEAT (summer),
COOL HEAT (between seasons).
