3
3. Attach the Drain Pump
The drain pump must be attached before installation of the indoor unit.
3-1. Preparation for the indoor unit
(1) Remove the fixing screws (2 locations) shown in Fig. 3-1, and remove the
control box cover.
Fig. 3-1
(2) Remove the fixing screws (5 locations) shown in Fig. 3-2, and remove the
maintenance cover.
Fig. 3-2
(3) Remove the fixing screws (2 locations) shown in Fig. 3-3, and remove the
Drain socket hole cover.
* These screws will be reused to fix the drain socket. Keep them in a safe
place.
Fig. 3-3
3-2. Attach the drain pump
(1) Attach the drain pump assy
1
and drain socket as shown in Fig. 3-4 using
four PTT screws
4
.
* When attaching the drain socket, make sure that drain hose is straight.
(2) Attach the Rubber Plug
2
.
Fig. 3-4
Control box cover
Fixing screw
Fixing screw
Maintenance cover
Fixing screws
Fixing screws
Drain socket hole cover
Drain socket
Drain pump assy
1
Rubber Plug
2
Summary of Contents for PAC-DRP10DP-E
Page 7: ...7 ...
Page 8: ...VN79D552H02 ...
