WARNING:
Use the DC power cord according to the recommendations as below, in order to comply
with ANSI/AAMI ES60601-1 and CAN/CSA-C22.2 No. 60601-1. See page 3.
The DC power cord should be UL or CSA approved, for external interconnection of
electronic equipment, AWG 18 in size, 2 m or shorter in length, PVC insulated (80°C or
higher), and 5.6 to 6.2 mm in outer diameter.
CAUTION:
Please review the Installation and Operation manuals for proper product guideline before
installing the printer. Both manuals provide vital information.
WARNING:
Install and use this appliance in accordance with the instruction manual for safety and
EMC (Electromagnetic Compatibility). If it is not installed and used in accordance with the
instruction manual, it may cause interference to other equipment and/or other risk.
WARNING:
Configure the system so that you can stop the power supply easily.
WARNING:
When installing the printer in the system, ensure that only the front panel is
exposed and accessible. Touching the outer surface of the printer except for the
front panel may cause injury or burns.
