manualshive.com logo in svg

Mitsubishi Electric NM-C130FD, Installation And Operation Manual

Share
Download
Mitsubishi Electric NM-C130FD Installation And Operation Manual Download Page 33

 

- 27 - 

BCS Adjust 

Brightness 

The screen brightness can be adjusted from 0 to 255 stages, and the default is 128. The brightness 
may differ depending on the equipment and PC monitor status. 

 
Contrast 

The screen contrast can be adjusted from 0 to 127 stages, and the default is 73. The contrast may 
differ depending on the equipment and PC monitor status. 
 

Saturation 

The screen saturation can be adjusted from 0 to 127 stages, and the default is 64. The saturation 
may differ depending on the equipment and PC monitor status. 

 

MPEG4 Video Stream 

Frame rate 

Upon the real-time play, users should select a frame refresh rate per second. If the rate is high, the 
image will become smooth. On the other hand, if the rate is low, the image will not be natural but it 
can reduce a network load.   
 

Bit-rate control   

Variable bit rate (VBR):

 It refers to the type of using a variable bit rate (VBR). Increase a bit rate for 

the image with much motion, and decrease a bit rate for the image with little motion. The basic 
setting value is a VBR type.   

Constant bit rate (CBR):

 Using a constant bit rate (CBR) may guarantee a stable play. However, if a 

large amount of data is not required, it may cause the waste of a transmission rate. If a large 
amount of data is required, it may cause the image quality to be decreased. 

Profile 

SP (Simple Profile) is available up to the CIF resolution and 384kbit/s.   
ASP (Advanced Simple Profile) is available up to the 4CIF resolution and 8000kbit/s.   
 

GOV size 

Enter the GOV (group of VOP) size. If users want to have a high quality of fast image one by one, 
please decrease the value. For the purpose of general monitoring, please do not change a basic 
value. Such act may cause a problem to the system performance. For the details of GOV setting, 
please contact the service center.   
 
 
 
 
 
 
 
 

Summary of Contents for NM-C130FD























































Reviews:

No comments

Brands by name

Popular brands

Load more brands