23
DISASSEMBLY INSTRUCTIONS
10
MU-A07YV -
MU-A09YV -
MU-A12YV -
OUTDOOR UNIT
E1
E1
E1
OPERATING PROCEDURE
PHOTOS
1. Removing the cabinet
(1) Remove the screws of the top panel.
(2) Remove the screw of the service panel.
(3) Remove the screws of the cabinet.
(4) Remove the screws of the front panel and motor support.
(5) Remove the service panel, and remove the screw from
the insides.
(6) Remove the top panel.
(7) Remove the cabinet.
Photo 1
Photo 3
Screws of the
top panel
Service
panel
Screws of the
service panel
Screws of the
top panel
Screws of the
cabinet
Screws of the cabinet
Photo 2
Screws of the front panel and motor support
Screws
of the
cabinet
(1) Slide the sleeve and check if there is a locking lever or not.
(2) The terminal with this connector is a terminal
with lock mechanism
1
Slide the sleeve.
2
Pull the terminal while
pushing the locking
lever.
1
Hold the sleeve, and
pull out the terminal
slowly.
In case of terminal with lock mechanism, detach the terminal as shown below.
There are two types ( Refer to (1) and (2)) of the terminal with lock mechanism.
The terminal with no lock mechanism can be removed by pulling it out.
Check the shape of the terminal and work.
<"Terminal with lock mechanism" Detaching points>
Connector
Sleeve
Locking lever
OB330-1.qxp 04.3.2 0:57 PM Page 23
