9
L R
L R
L R
AREA setting
W�en AREA �ave been set, �orizontal air flow (Horizontal Vane) can adjust automatically according to t�e temperature
measure from t�e wall and floor.
AREA setting
• Press AREA button.
• Each time the button is pressed, the area is changed in sequence:
Auto
→ Left
→ Rig�t
→ Cancel (Recover to previous setting)
Cancel MOVE EYE Sensor moves intermittently, measuring t�e floor and wall temperature.
Note:
• AREA setting is only available during MOVE EYE control operation. (Refer to page 8)
• If AREA setting is canceled, the vertical vane returns to the previously set position before AREA setting.
• T�e �orizontal air flow direction (vertical vane), can not be set during AREA setting.
• If AREA setting is set to AUTO in heating operation, the indoor unit automatically delivers warm air to the area
w�ere t�e floor/wall temperature is t�e lowest in t�e room.
• If AREA setting is set to AUTO in cooling operation, the indoor unit automatically delivers cool air to the area
w�ere t�e floor/wall temperature is t�e �ig�est in t�e room.
Ex.) In heating operation
Day
Night
Warm area
Cold area
The indoor unit delivers warm air detecting the cold area in the room.
Moving of
�orizontal air flow direction
Indoor unit
display
NOTE
Indication of AREA setting
·
T�e �orizontal air flow direction c�anges if MOVE EYE Sensor detects
approx.3 temperature difference.
·
In AUTO of AREA setting, both right and left lamps are lighted when the
room is evenly air-conditioned.
Light
Black out
Black out
Light
Light
Light
Cancelling AREA setting
• AREA setting is cancelled when WIDE VANE button is pressed.
Indoor unit installation location and air-conditioning area.
Installation at left
Installation at center
Installation at right
• Be sure to set the side switch inside the remote controler to an appropriate position in accordance with the
installed position of the indoor unit. If the switch is not set correctly, the air conditioner may not function properly.
(Refer to Page 4)
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
■
Press AREA button (select cancel)
