21
2. Vertical vane
(
MSZ-GE60/71/80
)
(1) Vane motor drive
These models are equipped with a stepping motor for the vertical vane. The rotating direction, speed, and angle of
the motor are controlled by pulse signals (approximately 12 V) transmitted from microprocessor.
(2) The vertical vane angle and mode change as follows by pressing WIDE VANE CONTROL button.
(3) Positioning
To confirm the standard position, the vane moves until it touches the vane stopper. Then the vane is set to the select-
ed angle.
Confirming of standard position is performed in the following cases:
(a) OPERATE/STOP (ON/OFF) button is pressed (POWER ON).
(b) SWING is started.
1
2
3
4
5
6
(SWING)
(11) LONG MODE (
) (
MSZ-GE60/71/80
)
By pressing LONG button indoor fan speed becomes faster than setting fan speed on the remote controller, and the
horizontal vane moves to the position for LONG mode. The remote controller displays “
”. LONG mode is can-
celled when LONG button is pressed once again or VANE CONTROL button is pressed or ECONO COOL button is
pressed in COOL mode. In the following example, the vertical vane is set to
(front.).
COOL / DRY / HEAT / AUTO CHANGE OVER
Fan speed : Faster
Solid arrow : When the LONG mode is used.
Dotted arrow : When the LONG mode is not used.
(4) SWING (
) MODE
By selecting SWING mode with WIDE VANE CONTROL button, the vertical vane swings horizontally. The remote
controller displays “
”. Swing mode is cancelled when WIDE MODE CONTROL button is pressed once again.
9-7. TIMER OPERATION
1. How to set the time
(1) Check that the current time is set correctly.
NOTE:
Timer operation will not work without setting the current time. Initially “0:00” blinks at the current time display
of TIME MONITOR, so set the current time correctly with CLOCK SET button.
How to set the current time
(a) Press the CLOCK set button.
(b) Press the TIME SET buttons (
and
/
and
) to set the current time.
• Each time FORWARD button (
/
) is pressed, the set time increases by 1 minute, and each time
BACKWARD button (
/
) is pressed, the set time decreases by 1 minute.
• Pressing those buttons longer, the set time increases/decreases by 10 minutes.
(c) Press the CLOCK set button.
(2) Press OPERATE/STOP (ON/OFF) button to start the air conditioner.
(3) Set the time of timer.
ON timer setting
(a) Press ON TIMER button(
/
) during operation.
(b) Set the time of the timer using TIME SET buttons (
and
/
and
).
OFF timer setting
(a) Press OFF TIMER button (
/
) during operation.
(b) Set the time of the timer using TIME SET buttons (
and
/
and
).
Each time FORWARD button (
/
) is pressed, the set time increases by 10 minutes: each time
BACKWARD
button (
/
) is pressed, the set time decreases by 10 minutes.
2. To release the timer
To release ON timer, press ON TIMER button (
/
).
To release OFF timer, press OFF TIMER button(
/
).
TIMER is cancelled and the display of set time disappears.
OBH531E
Summary of Contents for MSZ-GE22VA-A1
Page 53: ...53 OBH531E ...
