11
I-warm Mode
In Heating mode,when you wish to operate the unit with the temperature set to 10
℃
.
In Heating mode,press the
button
The temperature is displayed to be
「
10
℃」
on the remote controller.
To release
Press the
button once again
When the set temperature is increased or the mode is switched to Cooling
·
Drying mode,it can be released.
In the modes other than Heating,the unit can't run in the I-warm mode.
In the condition of not releasing it,the I-warm mode will not be kept after the unit is shutdown.So when the
unit restarts,it will go back to its original Heating Mode.
When you leave the room and shut down the air conditioner,the
temperature in the room will go down due to the shutdown.But if you
select the I-warm mode at this point,then when you go back to the
room,you will not feel very cold and the heating effect in the room can
also be enhanced.
In cold seasons,if nobody stays at home because the family are out on
vacation,certain temperature needs maintaining in the room to reduce
the possibility of damaging the buildings due to too low temperature.
Then you can select the I-warm mode and the electric power consumed
by the air conditioner will be apparently less than that consumed in the
Heating Mode.
Details about I-warm mode
Summary of Contents for MSZ-AH09VA-H1
Page 38: ...38 ...
