33
PHOTOS
3. Removing the outdoor fan motor
(1) Remove the cabinet. (Refer to 1)
(2) Unconnect the connector remove the hooked lead wire
from the fan motor.
(3) Remove the propeller nut and remove the propeller.
(4) Remove screws fixing the fan motor.
4. Removing the compressor
(1) Remove the cabinet. (Refer to 1)
(2) Remove the soundproof felt.
(3) Remove the terminal cover on the compressor
(4) Remove the electrical assembly.(Refer to 2)
(5) Release gas from the refrigerant circuit.
(6) Disconnect the welded part of the discharge pipe
(7) Disconnect the welded part of the suction pipe.
(8) Remove nuts fixing the compressor.
(9) Remove the compressor.
Photo 5
Compressor
Discharge
pipe
Suction
pipe
Compressor set nuts
Photo 4
Hook
Connector
Propeller
Propeller nut
OPERATING PROCEDURE
Glass
terminal
OB188--2.qxp 25/9/97 6:11 PM Page 13
Summary of Contents for MS-18NN Series
Page 4: ...4 REMOTE CONTROLLER MS 18NN MS 24NN S1 S1 ...
Page 39: ......
