Operating Manual
69-2427EFS—01
2
About your remote controller
Your new remote controller is pre-programmed and ready to go. All you have to do is
set the time and day. Then check the settings below and change if needed:
Set time and day (required for proper operation)
1.
.......................... See page 5
Select fan setting
2.
................................................................................. See page 6
Select system setting
3.
.......................................................................... See page 7
Program schedules:
4.
Preset to energy-saving levels
while space is occupied (assumes arrival at 8 am
and departure at 10 pm) ................................................................ See pages 10-11
ONE TOUCH TEMP CONTROL:
You can override the program schedule at any time,
and manually adjust the temperature (see pages 13-16).
