Select “Service” from the Main menu, and press the [SELECT] button.
button.
[F1]
through [F4] buttons, and then press the [SELECT]
rent setting.
[SELECT] button is pressed, the target indoor unit will start fan opera-
tion. If the unit is common or when running all units, all indoor units for the se-
lected refrigerant address will start fan operation.
appears highlighted. Non-highlighted items indicate that no function settings
are made. Screen appearance varies depending on the “Unit No.” setting.
[F1] or [F2] button to move the cursor to select the mode number, and
change the setting number with the [F3] or [F4] button.
[SELECT] button to send the set-
ting data from the remote controller to the indoor units.
Function setting screen.
F1
F2
F3
F4
Service menu
Cursor
Main menu:
Test run
Input maintenance info.
Function setting
Check
Self check
F1
F2
F3
F4
Function setting
Cursor
Address
Monitor:
Ref. address
Unit No.
Grp.
/1/2/3/4/All
F1
F2
F3
F4
Function setting
Cursor
Cursor
Request:
Ref. address
Mode 1
Mode 2
Mode 3
Mode 4
Grp.
F1
F2
F3
F4
Function setting
Cursor
Cursor
Request:
Ref. address
Mode 7
Mode 8
Mode 9
Mode 10
Unit # 1
F1
F2
F3
F4
Function setting
Ref. address
Sending data
Going to the function select mode
Press the
button between of 5 seconds.
Press the
Direct the wireless remote controller toward the receiver of the indoor unit and
press the
button.
Setting the unit number
Press the
button to set unit number
Direct the wireless remote controller toward the receiver of the indoor unit and
press the
button.
Select a mode
Press the
button to set Mode number
Direct the wireless remote controller toward the receiver of the indoor unit and
press the
button.
Selecting the setting number
Use the
button to change the Setting number
Direct the wireless remote controller toward the receiver of the indoor unit and
press the
button.
To select multiple functions continuously
Repeat select and to change multiple function settings continuously.
Complete function selection
Direct the wireless remote controller toward the sensor of the indoor unit and press
the
button.
