Mitsubishi Electric Mr.Slim PLH42AK, Technical & Service Manual

Page: 58 / 73

OC193-56
13
DISASSEMBLY PROCEDURE
OPERATING PROCEDURE PHOTOS&ILLUSTRATION
1. Removing the air intake grille
(1) Unhook the clasps at the edge of the grille and open the
grill.
(2) Lift up the grill in direction of arrow
1
in Figure.2.
(3) Pull the grill toward you to remove. (In direction of arrow
2
)
2. Removing the side panel
(1) Remove a white screw of the side panel (RIGHT).
(2) Pull out the panel toward you to remove.
(3) Remove a white screw of the side panel (LEFT).
(4) Pull out the panel toward you to remove.
3. Removing the lower panel
(1) Remove the lower panel set screws, 2 pcs on each side
and 3 pcs at the rear. (total 7 pcs)
W
PCH24EK has 4 pcs at the rear and 2 pcs on each
side. (total 8 pcs)
4. Removing the electrical box
(1) Remove the air intake grille. (Refer to 1.)
(2) Remove the support bar set screw and remove the bar.
(See figure. 4)
(3) Loose the lead clamps (2 pcs) for the sirocco fan and the
louver motor. (See photo 1)
Figure 1
Figure 2
Figure 3
Figure 4
Photo 1
PCH24FK
1
Side panel (L)
Air intake grille
Lower panel
2
1
2
1
Side panel (R)
Support bar
Lower panel
Electrical box
Clamps for fan lead