Mitsubishi Electric Mr. Slim PLA-ZM EA Series, Operation Manual

Page: 11 / 248

9
en
3. Operation
■
Manual vane angle (Wired remote controller)
Select “Comfort” from the Operation
menu, and press the [SELECT] but-
ton.
Select “Manual vane angle” with the
[F1] or [F2] button, and press the
[SELECT] button.
Move the cursor to “Ref. address”
or “Unit No.” with the [F1] button to
select.
Select the refrigerant address and
the unit number for the units to
whose vanes are to be fixed, with
the [F2] or [F3] button, and press the
[SELECT] button.
• Ref. address: Refrigerant ad-
dress
• Unit No.: 1, 2, 3, 4
Press the [F4] button to confirm
the unit.
Select “Vane” with the [F1] button.
Select “4-way” or “2-way” with the
[F2] or [F3] button, and press the
[F4] button.
■
Vane setting
Press the [SELECT] button to save the settings.
A screen will appear that indicates the setting information is being trans-
mitted.
The setting changes will be made to the selected outlet.
The screen will automatically return to the one shown above (step 5)
when the transmission is completed.
Make the settings for other outlets, following the same procedures.
If all outlets are selected, will be displayed the next time
the unit goes into operation.
Navigating through the screens
• To return to the previous screen .......... [RETURN] button
Step 1 Step 2
Step 3
No setting
Draft
reduction*
All outlets
Step 5 Step 4
The current vane setting will appear.
Select the desired outlets from “1,”
“2,” “3,” “4,” or “1, 2, 3, 4 (all outlets)”
with the [F1] or [F2] button.
Press the [F3] or [F4] button to go
through the following options and
select the desired setting.
* Draft reduction
The airflow direction for this set -
ting is more horizontal than the
airflow direction for the “Step 1”
setting in order to reduce a drafty
feeling. The draft reduction can
be set for only 1 vane.
Note:
Do not set the draft reduction in an environment with high humidity.
Otherwise, condensation may form and drip.
Main menu:
Cursor
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
F1 F2 F3 F4
Setting display:
Cursor
Comfort
Manual vane angle
3D i-See sensor
F1 F2 F3 F4
Manual vane angle
Input display:
Cur. Address
Ref. address
Unit No.
Identify unit Check button
Check
F1 F2 F3 F4
Manual vane angle
Cur. Angle
Ref. address
Unit No.
Vane 4-way /2-way
Cursor
Input display:Angle button
F1 F2 F3 F4
Select:
Manual vane angle
Outlet Angle
Setting
Manual vane angle
F1 F2 F3 F4
RG79F156H03_EN.indd 9 2019/04/17 9:38:05