En-9
● OPERATING INSTRUCTIONS ●
N
ATURAL FLOW OPERATION
Press
during COOL or FAN mode
page 6
to
start NATURAL FLOW operation.
Press
again to cancel NATURAL FLOW opera-
tion.
• NATURAL FLOW operation is also canceled when the POWERFUL or
ECONO COOL button is pressed.
What is “NATURAL FLOW”?
Airfl ow that imitates a natural breeze is produced in this mode. The discomfort
of being hit directly by constant, unnatural airfl ow will be reduced.
Note:
As the fan speed changes constantly during NATURAL FLOW operation, the
sound of air fl ow, wind velocity and air fl ow temperature also change. This is
not a malfunction.
Press
to start D.S.PLASMA operation.
• D.S.PLASMA lamp turns on. (Display section)
Press
again to cancel D.S.PLASMA operation.
• D.S.PLASMA lamp turns off. (Display section)
What is “D.S.PLASMA operation”?
In the D.S.PLASMA operation, the indoor unit built-in device reduces airborne
fungi, viruses, mold, and allergens.
Note:
• Never touch the D.S.PLASMA device during operation. Although the
D.S.PLASMA device is safety-conscious design, touching this device could
be the cause of trouble as this device discharge high voltage electricity.
•
A “hissing” sound may be heard during the D.S.PLASMA operation. This sound
is produced when plasma is being discharged. This is not a malfunction.
•
D.S.PLASMA lamp does not turn on if the front panel is not closed completely.
Press
during COOL or HEAT mode
page 6
to
start POWERFUL operation.
Fan speed
: Exclusive speed for POWERFUL mode
Horizontal vane : Set position, or downward airflow position during
AUTO setting
• Temperature cannot be set during POWERFUL operation.
Press
again to cancel POWERFUL operation.
• POWERFUL operation is also cancelled automatically in 15 minutes,
or when the ON/OFF, FAN, ECONO COOL, NATURAL FLOW, or
i-save button is pressed.
P
OWERFUL OPERATION
1
Press
or
during operation to set the timer.
(ON timer) : The unit turns ON at the set time.
(OFF timer) : The unit turns OFF at the set time.
*
or
blinks.
* Make sure that the current time and day are set correctly.
Page 3
2
Press
(Increase) and
(Decrease) to set the
time of timer.
Each press increases or decreases the set time by 10 minutes.
•
Set the timer while
or
is blinking.
3
Press
or
again to cancel timer.
Note:
• ON and OFF timers can be set together. mark indicates the order of timer
operations.
• If power failure occurs while ON/OFF timer is set, see
page 6
“Auto restart
function”.
T
IMER OPERATION (ON/OFF TIMER)
D
.S.PLASMA OPERATION
SG79F713H01_en.indd 9
2013/11/15 13:51:22
