En-6
N
AME OF EACH PART
Remote controller
Remote controller
holder
Signal transmitting section
Distance of signal : About 6 m
*
Beep(s) is (are) heard from the
indoor unit when the signal is
received.
* Refer to
page 15
for ERROR
CODE DISPLAY MODE.
•
Install the remote controller
holder in a place where
the signal can be received
by the indoor unit.
Only use the remote
controller provided with
the unit.
Do not use other remote
controllers.
If two or more indoor units
are installed in proximity
to one another, an indoor
unit that is not intended to
be operated may respond
to the remote controller.
Note:
• Make sure the polarity of the batteries is correct.
•
Do not use manganese batteries and leaking batter-
ies. The remote controller could malfunction.
• Do not use rechargeable batteries.
• The battery replacement indicator lights up when
the battery is running low. In about 7 days after the
indicator starts lights up, the remote controller stops
working.
• Replace all batteries with new ones of the same
type.
• Batteries can be used for approximately 1 year.
However, batteries with expired shelf lives last
shorter.
• Press RESET gently using a thin instrument.
If the RESET is not pressed, the remote controller
may not operate correctly.
Before operation:
Insert the power supply plug into the
power outlet and/or turn the breaker on.
Installing the remote control-
ler batteries
P
REPARATION
BEFORE OPERATION
4.
Press RESET.
2.
Insert the nega-
tive pole of AAA
alkaline batteries
fi rst.
1.
Remove the back lid.
3.
Install the back lid.
FAST
COOLING
button
Page 9
Operation
display
section
OFF/ON
(stop/
operate)
button
Page 9
Tem-
perature
buttons
Page 7,15
Operation
select
button
Page 7
FAN speed
control
button
Page 8
VANE
control
button
Page 8
TIME set
button
Page 9
RESET button
Page 6
CHECK button
Page 15
TIMER
mode
select
button
Page 9
Battery replacement
indicator
Page 6
A5_VG79Y078H02_01En.indd 6
2019/12/18 13:38:39
