manualshive.com logo in svg

Mitsubishi Electric Mr.Slim MA Series, Manual

Share
Download
Mitsubishi Electric Mr.Slim MA Series Manual Download Page 126

1. Filter information

[2]

[3]

Press the

F4

button to reset filter sign.

Refer to the indoor unit Instructions Manual for how to clean the filter.

Button operation

[1]

Select "Filter information" from the Maintenance menu and press  
the

SELECT

button.

8

. Maintenance

Select "OK" with the

F4

button.

A confirmation screen will appear.

Navigating through the screens

• To go back to the Main menu  .................. MENU button
• To return to the previous screen ............... RETURN button

79

3

Select “OK” with the 

F4

 button.

A confirmation screen will appear.

Navigating through the screens

• 

To go back to the Main menu .......... 

MENU

 button

• 

To return to the previous screen ...... 

RETURN

 button

When the 

is displayed on the Status display and 

the Main display in the Full mode, the system is 
centrally controlled and the filter sign cannot be reset.

If two or more indoor units are connected, filter cleaning timing for each unit may be different, 
depending on the filter type.
The icon 

will appear when the filter on the main unit is due for cleaning. 

When the filter sign is reset, the cumulative operation time of all units will be reset.

The icon 

is scheduled to appear after a certain duration of operation, based on the premise that 

the indoor units are installed in a space with ordinary air quality. Depending on the air quality, the 
filter may require more frequent cleaning.

The cumulative time at which filter needs cleaning depends on the model.

Main menu:

Cursor

Maintenance menu

Error information

Filter information

Cleaning

Main menu:

Filter information

Reset

Press Reset button after

filter cleaning.

Filter information

Filter information

OK

Cancel

Reset filter sign?

Filter sign reset

Main menu:

Filter information

Filter information

OK

Cancel

Reset filter sign?

Filter sign reset

Main menu:

Fri

26.5

will appear on the Main display in the Full mode when it is time to clean the 

filters.

Wash, clean, or replace the filters when this sign appears.

Refer to the indoor unit Instructions Manual for details.

MA

REMOTE

CONTROLLER

8

. MAINTENANCE [P

AR-CT01MAA-PB/SB]

D-126

MA REMOTE CONTROLLER

Summary of Contents for Mr.Slim MA Series



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands