Defrost heater and Drip tray
(6) Photo 6 Lift up Evaporator and remove the Defrost
heater out of base after remove Heater cover plate
and Drip tray
Caution on assembly
1. Insert the Fan into the base of Fan motor's shaft,
check if the Fan rotates with your finger.
2. When inserted Drip tray to effect to slacken the
lead wire of Defrost heater in order to prevent water
from entering the glass tube.
3. Attach Defrost thermistor with Muffler and tighten
the binder.
2. Remove parts inside the Refrigerator room
(1) Remove Chilled case door and Slide chilled case ,
remove Glass shelves of refrigerator room , remove
the Control panel
(2) Remove Lamp cover R from Catch (Photo 8)
(3) Remove Screw (Photo 8) and Rivet (Photo 7) , pull
the Control panel with to right refrigerator wall.
(4) Remove S-tape lam, Detach connector between
control panel and refrigerator wall.
(5) Remove Catch in left side (Photo 9) and right side of
Duct R assy, Remove Duct R assy (Photo 9)
(Duct damper setting inside Duct R assy)
(6) Remove S-tape lam, Detach Temp control board
from Catch before Remove Temp control board from
lock socket, Remove Connector from Temp control
board
Remove LED attach assy after remove Lamp cover
(Photo 1
1
,1
2
)
(7) Remove Screw between LED attach assy and Control
panel (Sub) and unlock Catch before remove LED
board from LED attach socket.
(*Remark : LED attach assy is assembling between
LED board attach and LED light board)
OPERATING PROCEDURE
PHOTOS
Photo 7
Photo 6
Defrost heater
Heater roof
Drip tray
Evaporator
Def thermistor
Rivet
Catch
Screw
Control panel
Lamp cover R
Control panel (Sub)
Catch
Photo 8
Duct R assy
Control panel
Temp control board
Photo 11
S-tape lam
S-tape lam
Catch (Left)
Connector
(สําหร ับรุ่น
MR-
Screw
Screw
LED attach
assy(Back)
LED attach
assy(
ด้านหลัง
)
Catch
Connector
Catch
LED attach
assy(Front)
(
For model
MR-FT35EH)
LED attach
assy(Front)
LED light
board
Catch
Connector
Photo 12
LED light
board
Photo 9
Photo 10
(
For model MR-
FT46EH,FT51EH)
LED attach
assy(Back)
20
Summary of Contents for MR-FT35EH-SW-C
