EN-3
EN
N
AME OF EACH PART
Display section
Air inlet (back and side)
Refrigerant piping
Air outlet
Drain outlet
Horizontal vane
Vertical vane
Air outlet
Air fi lter
(Air purifying
fi lter)
Air inlet
Air cleaning fi lter
(Silver-ionized air purifi er
fi lter, option)
Outdoor unit
Indoor unit
Outdoor units may be different in appearance.
*1 The manufacturing year and month is indicated on the spec name plate.
Intake grille
Safety strings
Spec name plate *1
Spec name plate *1
Open the display cover
Remote control receiving section
Emergency operation
switch
Operation indicator lamp
Operation indicator lamp
When the remote controller cannot be used...
Emergency operation can be activated by pressing the emergency operation
switch (E.O. SW) on the indoor unit.
Each time the E.O. SW is pressed, the operation changes in the following order:
Set temperature : 24°C
Fan speed : Medium
Horizontal vane : Auto
Emergency COOL
Emergency HEAT
Stop
Before operation:
Insert the power supply plug into the power outlet and/or
turn the breaker on.
Installing the remote controller batteries
1.
Remove the front lid.
2.
Insert the negative
pole of AAA alkaline
batteries fi rst.
3.
Install the front lid.
4.
Press RESET.
Setting current time
1.
Press CLOCK.
4.
Press CLOCK again.
2.
Press either the TIME button
or the TIMER buttons to set
the time.
Each press increases/decreas-
es the time by 1 minute (10
minutes when pressed longer).
3.
Press the DAY button
to set the day.
P
REPARATION BEFORE OPERATION
RG79Y980H01_01En.indd 3
2018/05/02 14:41:03
