17
E
Operating
CLEAN FILTER Lamp
When it becomes time to clean the silver ion fi lter and air intake, you are notifi ed by the fl ashing or lighting of the
CLEAN FILTER lamp. Press the POWER switch to turn off the power, and then make sure you perform cleaning before
pressing the RESET button.
CLEAN FILTER lamp fl ashes.
Clean the silver ion fi lter and air intake, and then insert the power plug and
press the RESET switch until you hear a beep.
If you continue use without performing cleaning:
CLEAN FILTER lamp lights.
If you continue operation for approximately
another 150 hours while the CLEAN FILTER lamp
is fl ashing, an alarm sounds,
the lamp lights, and operation stops.
Clean the silver ion fi lter and air intake, and then insert the power plug and
press the RESET switch until you hear a beep. P21
Operation is not possible while the CLEAN FILTER lamp is on.
When the CLEAN FILTER lamp is fl ashing or on, an alarm sounds each time you
turn on the POWER switch.
Information
In the following cases as well, the CLEAN FILTER lamp lights and
operation stops to prevent the temperature inside the unit from rising.
The silver ion fi lter and air intake are clogged.
The air outlet and fi lter cover are blocked by a curtain, towel, or the
like.
The room temperature is high (approximately 40°C).
P21
When the operation time becomes approximately
150 hours, an alarm sounds and the CLEAN
FILTER lamp fl ashes.
e̲mj̲ez6cx̲h.indb 17
e̲mj̲ez6cx̲h.indb 17
2008/10/16 16:10:11
2008/10/16 16:10:11
