background image

5

Bef

ore using the

unit

Warning

Keep the unit always in an

upright position.

Inclining the unit may cause water

in the tank to leak into the unit,

resulting in malfunction

. Should

you incline the unit accidentally,
contact the place of purchase for
advice.

Do not carry the unit horizontally.

This may 

result in malfunctions

.

Do not point air-flow from
the unit directly at the
body .

If air-flow is directed at the body for
long periods, it may 

harm one’s

physical condition

and 

lead to

dehydration

.

Install the unit in a location where
the floor is flat and stable.

If the unit falls over, the water
collected in the water tank may
leak damaging surrounding objects
and in turn result in 

fire or electric

shock caused by an electrical
leak

.

Grasp the plug and remove
from the power socket.

When removing the plug from the
power socket, do not pull on it
diagonally or by the cord as this
may cause the projections/wiring to
be damaged resulting in 

a short

circuit, electric shock or fire

.

Before moving the unit always
switch it off, unplug it and remove
water from the water tank.

Moving the unit with water in its
tank may cause the water to leak
and damage the surrounding
objects and in turn result in 

electric

shock and/or an electric leak

.

After emptying the tank,
transport the unit by grasping
the handle firmly.

Losing your footing while carrying
the unit may cause personal injury
or damage to the floor.

When using the continuous
drainage outlet, make sure
to position the hose so that
the water drains without
obstruction.

The water in the tank may leak and
damage 

surrounding objects

.

When draining water
continuously or left
unattended for long
periods, inspect the unit
every two weeks.

Do not allow debris to clog
the filter/hose as this may
cause over-heating/leakage.

Use the unit with caution in
rooms where the walls,
furniture and art work is
vulnerable to dry air, as it
may cause cracks and warping.

Switch the unit off and
unplug from the power
source when cleaning it.

When the unit is on, the internal fan
rotates at high speeds and may

cause injury

.

Unplug the unit from the
power source when not
using the unit for an
extended period of time.

Otherwise it may cause 

fire and/or

electric shock caused by an
electric leak

.

CAUTION

The appliance is not inteded for use by young children or infirm persons without supprvision;

Young children should be suppervised to ensure that they do not play with the appliance

Summary of Contents for MJ-E26SX-A1

























Reviews: