background image

¡

The amount of dehumidification decreases with the temperature and humidity.

¡

The humidity level cannot be set with LOW, MILDEW GUARD, and LOW TEMP.

14

¡

LOW TEMP

The unit operates continuously automatically controlling airflow
according to room temperature. The air flow is strongest below 15

°

C.

The use of LOW TEMP mode is recommended when the Low
temperature indicator 

is lit.

When the temperature is low, condensation may still form on windows exposed to the

outside air even when LOW TEMP mode is operating.

¡

MILDEW GUARD

The unit lowers humidity levels automatically once a day,
suppressing mildew growth.

¡

The unit operates intermittently for 2-4 hours a day (24 hours).
The operating time varies depending on the humidity.

¡

The unit continues to operate when the humidity does not
decrease.
Humidity 40%

Approx. 2 hours

Humidity 50%

Approx. 4 hours

Refrain from turning on ventilation fans or opening windows or doors as this lowers performance.

Mildew growth may still occur due to the fungus type and conditions of the room.
E.g. Rooms that contain excessive condensation, bathrooms, and places with bad airflow (insides of
closets and behind furniture).

This mode does not remove existing mildew.

Do not use in conjunction with OFF Timer mode. Effects may not be achieved.

Setting modes

Inf

ormation

Information

LOW, MILDEW GUARD and LOW TEMP

LOW mode is for when you want to leave the dehumidifier on. MILDEW GUARD mode
suppresses mildew growth. LOW TEMP mode is for preventing condensation or when the
room temperature is low.

Changes with every press

Press

¡

Frame appears around selected mode.

¡

LOW

The dehumidifier operates regardless of the humidity level.

ON

24 hours

Dehumidifies

Dehumidifies

Standby

24 hours

Standby

How is mildew

Mildew is unable to produce new spores if dried as mycelia. The Mildew

growth suppressed?

Guard feature applies this principle. (However, the spores themselves are 
resilient to dry conditions.)

“Identification of Aspergillus and Penicillium” <Research paper by Dr. K. Abe of the Environmental Biology Research Center>

Repeat

3

9

Summary of Contents for MJ-E16VX-S1





























Reviews: