4
1
Remove the front panel and
pre-filter.
2
Remove the silver ion filter.
3
Soak the silver ion filter in
water.
Do not use detergent or hot water.
Also, do not brush or rub while
soaking as this may damage the filter.
• Stains may remain on the filter, but should not
affect performance.
• The filter can be soaked for a total of eight
times.
After that, replace with a new filter.
Once every three months
Silver ion filter
Front panel
Soak in water the filter about once every three months.
Soak in cool to
lukewarm water for 30
minutes.
Maintenance (Cont.)
4
Dry the silver ion filter.
Do not hang with pegs as this may
damage the filter.
Do not use the filter while wet.
5
Fit the silver ion filter.
With the strips facing up, set the
silver ion filter inside the tabs on the
pre-filter.
6
Attach the pre-filter and front
panel.
Pre-filter
1
Remove by holding
the bottom.
2
Remove by
holding the
tabs.
Performance is
unaffected even if the
metal fins inside the main
unit are slightly bent.
Silver ion filter
Pre-filter
Tabs (6)
1
Attach by holding
the tabs.
2
Hook the top edge
to the top part of
the unit and push
the bottom in.
e_mj_e14cg_s1_swe.indb 24
2013/12/19 20:32:51
