background image

13

Oper

ating

E

Dehumidifying

The operation mode can be selected accordingly to the situation.

AUTO

EASY

HIGH

LOW

In order to maintain the humidity level, the unit 

operates intermittently after automatic switching of 

air flow rate.

• 

When the current humidity is lower than the set 

value, the unit will stop (both the blower/louvre will 

stop). It will restart if the humidity level is higher 

than the set value.

• 

For 6 minutes after the power is on, the unit will 

begin operating regardless of the room humidity.

To relieve the discomfort from dampness, the unit 

operates intermittently after the automatic switching 

of airflow rate. Blowing air is used to control the room 

temperature rise if the room temperature is high.

It is recommended when you want to maintain the 

comfortable level of humidity.

• 

If the set humidity level is reached,sometimes the 

blower/louvre will stop operating.

The blower operates continuously in HIGH airflow 

mode.

The rotation speed of the compressor motor is 

increased.

It is recommended for strong dehumidification.

The blower operates continuously in LOW airflow mode.

The rotation speed of the compressor motor is 

decreased.

It is recommended when you want to dehumidify with 

lower blower sounds.

Inf

or

mation

Sometimes it would take a long time to bring down the 

humidity depending on opening and closing frequency 

of the room door or the size or shape of the room.

<To confirm the humidity setting>

• 

After displaying 

the current humidity setting is 

displayed. 

After 3 

seconds

After approximately 3 seconds,the 

display returns to the current 

humidity display.

Press

50

20

30

27

60

Humidity setting (%)

Room temperature

(°C)

If the room temperature 

is below 27°C, the 

unit will dehumidify 

according to the room 

temperature.

If the room temperature is 

above 27°C, the unit will stop 

dehumidification when the humidity 

level is below 50%, but the blower 

will work. Dehumidification restarts 

when humidity rises above 60%.

Installing the dehumidifier

Place the dehumidifier in the 

room to use it.

(Make sure the back of the 

dehumidifier is not too close 

to any walls)

P5

Installing the dehumidifier

Place the dehumidifier in the 

room to use it.

(Make sure the back of the 

dehumidifier is not too close 

to any walls) 

P5

Installing the dehumidifier

Place the dehumidifier so 

that its back faces a closet or 

wardrobe to use it.

P5

e_mj_e100ar_h_cs55j.indd   13

2020/07/27   15:35:07

Summary of Contents for MJ-E100AR-H

























Reviews: