Mitsubishi Electric MELSERVO-J4 series, Instruction Manual

Page: 391 / 646

11 OPTIONS AND PERIPHERAL EQUIPMENT
11.8 Battery
389
11
MR-BAT6V1BJ battery for junction battery cable
• MR-BAT6V1BJ is compatible only with HG series servo motors. It cannot be used with direct drive motors.
• MR-BAT6V1BJ cannot be used for fully closed loop system.
• When MR-BAT6V1BJ is mounted on the MR-J4-500GF(-RJ), the front cover does not open. For this reason,
carry out wiring to the terminal block before mounting MR-BAT6V1BJ.
• For using the MR-J4-350GF4(-RJ), contact your local sales office.
Parts identification and dimensions
Production year and month of batteries
Production year and month are indicated in a serial number (SERIAL) on the rating plate. The second digit from left in the
number indicates the first digit of the dominical year, the third digit from left indicates a month (Oct: X, Nov: Y, Dec.: Z). For
November 2013, the Serial No. would be "SERIAL: _ 3Y _ _ _ _ _ _".
Specification list
*1 Quality of the batteries degrades by the storage condition. The battery life is 5 years from the production date regardless of the
connection status.
Item Description
Battery pack 2CR17335A (CR17335A

2 pcs. in series)
Nominal voltage [V] 6
Nominal capacity [mAh] 1650
Storage temperature [  ] 0 to 55
Operating temperature [

] 0 to 55
Lithium content [g] 1.2
Mercury content Less than 1 ppm
Dangerous goods class Inapplicable to the dangerous goods (Class 9)
 Page 569 Handling of AC servo amplifier batteries for the United Nations Recommendations on the Transport of
Dangerous Goods
Operating humidity and
storage humidity 5 %RH to 90 %RH (non-condensing)
Battery life
*1
5 years from date of manufacture
Mass [g] 66
Orange: Connector for servo amplifier
Black: Connector for branch cable
Case
[Unit: mm]
Mass: 66 [g]
34.8 69.3
38.5
Rating plate